MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)

- Introduce yourself and start planning (http://www.mechmate.com/forums/forumdisplay.php?f=88)

- - Hello to all (http://www.mechmate.com/forums/showthread.php?t=6605)

ymech

Sun 06 September 2020 02:17

Hello to all

I am yvo, 49 years old and l live in Holland. I am a teacher at a technical "middle" school in mechatronics. My roots are more in the mechanics.
Now i want to learn more about step motors and electric in general.

Therefore i decided to build a cnc router. I hope i can learn from other people and i hope it is also the onther way around.

Regars Yvo

jhiggins7

Sun 06 September 2020 05:10

Welcome Yvo. This is definitely a place to learn by doing. If you build a MechMate you will, by necessity, learn a great deal about CNC machines including mechanics, electronics and software.

ymech

Tue 08 September 2020 03:14

startup

Hello jhiggins7,

That's for sure. My goal is to work the electric and the mechanical parts out in solidworks and EPLAN Electric.

rischoof

Tue 08 September 2020 06:47

Hello Yvo, welcome to the site, nice to see a build in the Netherlands

MetalHead

Sat 07 November 2020 05:45

Welcome aboard!!

All times are GMT -6. The time now is 17:45.