MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   The Market Place (http://www.mechmate.com/forums/forumdisplay.php?f=69)
-   -   South Africa Nema 34, rack and pinions and bearings (http://www.mechmate.com/forums/showthread.php?t=5695)

iclazion Wed 30 January 2019 01:42

South Africa Nema 34, rack and pinions and bearings
 
Total R24000 Zar

-4 x Stepper motor Nema 34 WT86STH118-6004A 5.6A 8.7N-m(1232oz-in) 99mm
-4 x Stepper motor driver DQ860MA 7.8A 80V 256 micro-steps
-4 x Power supply : 350W 60V
-1 x Pc breakout board and cable + Extra set
-16 x W3X bearings
-4 x 2m module1 racks
-4 x Module1 22 teeth pinions

Contact me for more information or if you need more specifications or wiring diagrams?

Please note this is the last set, so first come first serve.

Kind Regards
Leonard v.d. Merwe
072 779 7237

info@cherryweb.co.za
http://www.cherryweb.co.za/PRINT/P1070558.jpg
http://www.cherryweb.co.za/PRINT/P1070560.jpg
http://www.cherryweb.co.za/PRINT/P1070561.jpg
http://www.cherryweb.co.za/PRINT/P1070564.jpg
http://www.cherryweb.co.za/PRINT/P1070565.jpg
http://www.cherryweb.co.za/PRINT/P1070571.jpg
http://www.cherryweb.co.za/PRINT/P1070572.jpg
http://www.cherryweb.co.za/PRINT/P1070575.jpg
http://www.cherryweb.co.za/PRINT/P1070576.jpg
http://www.cherryweb.co.za/PRINT/P1070585.jpg
http://www.cherryweb.co.za/PRINT/P1070587.jpg

iclazion Wed 30 January 2019 02:37

Some more information:

Stepper Motor Specifications:
Step Accuracy = 5%
Temperature Rise = 80C Max
Ambient temperature Range = -20C—+50
Insulation Resistance = 100MΩMin.500VC DC
Dielectric Strength = 500V AC 1 minute
Step Angle 1.8
Rate Voltage 3.08V
Rate Current 5.6A
Phase Resistance 0.55Ω
Phase Inductance 5.5 mH
Holding Torque 1232 (OZ-IN)

Stepper Motor Driver:
High performance
Average current control, 2-phase sinusoidal output current drive
Supply voltage from 24VDC to 80VDC
Opto-isolated signal I/O
Overvoltage, under voltage, overcurrent, phase short circuit protection
14 channels subdivision and automatic idle-current reduction
8 channels output phase current setting
Offline command input terminal
Motor torque is related to speed, but not related to step/revolution
High start speed
High holding torque under high speed
Input Voltage 24-80 VDC
Input Current < 6A
Output Current 2.8A ~ 7.8A
Consumption : 80W; Internal Insurance 10A
Working Temprature -10~45℃
Stocking temperature -40℃~70℃
Weight 500G

http://www.cherryweb.co.za/PRINT/MotorDimensions.jpg

iclazion Mon 04 February 2019 00:05

Price from 04/02/2019 is R16000

WhiteKnight Sun 11 October 2020 15:09

Is this still for sale?
 
Hi there, im also in SA, is this still for sale?


All times are GMT -6. The time now is 11:54.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.