MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   General - MM Operating (http://www.mechmate.com/forums/forumdisplay.php?f=85)
-   -   Cutting Dovetails on the MM (http://www.mechmate.com/forums/showthread.php?t=1089)

WTI Fri 07 November 2008 16:33

Cutting Dovetails on the MM
 
http://www.shopbottools.com/garysmusings.htm#Jig


I found this great reference for cutting dovetail joints on the SB, obviously it should work great on the MM.

Gary did a great job with the photos and the way to determine the box sides (no doubt the hardest part to explain to someone when they first get a dovetail jig).

WTI Wed 26 November 2008 22:28

http://www.youtube.com/watch?v=4Aw4l...eature=related

Video of SB dovetail cutting


All times are GMT -6. The time now is 06:44.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.