MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   Utility software (http://www.mechmate.com/forums/forumdisplay.php?f=17)
-   -   Z zero setter REALLY fantastic (http://www.mechmate.com/forums/showthread.php?t=2659)

Art Wed 24 March 2010 20:42

Z zero setter REALLY fantastic
 
At http://cnczone.com/forums/showthread.php?t=100594 . It is an addon to the Mach Blue screen set. Short version. At boot up do a reference all. Using the movable puck tool is zeroed to material. From now to machine power down the tool is zeroed using fixed touch off.

danilom Thu 25 March 2010 04:08

It's a great info! Works really well in the video, it will be the first thing to setup when my machine starts moving.

Thank you!

Robert M Thu 25 March 2010 04:44

Hey, hi Art….
Great to see your still around and active member !!
Thanks for sharing this, not all are updated with this or see all what’s up on the CNCzone!
I too will be installing this when time comes….seems like a BIG +
Amicalement, Robert ;)

dragonfinder1 Thu 25 March 2010 09:05

I've been using it for some time and love it. Also I use the laser zeroing tool for the "x" "y" axis as well.

http://www.cnczone.com/forums/showthread.php?t=48752

Johannescnc Sat 27 March 2010 05:36

Ditto! It works great!:D

Art Sat 27 March 2010 07:02

still lurking
 
Finished up the JoeCNC Hybrid and it is a nice low use machine. Next project will be a 4by4 80 watt laser. helping devolop a DIY kit. Part of that will be to build another MM which I hope will be a 4by4 but will see if I really need a 4by8. Hybrid just won't hold up to the alumnium cutting that I will need. Will be great to be able to mill my own parts as planning of using a lot of PVC and alumnium in the MM. So much good information out there!


All times are GMT -6. The time now is 08:37.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.