Hi starting a build in South Africa
Well started today ,I have decieded to use servo moters with right angle gear boxes. and to include a 4 th axis from the start. I think this is going to be fun.
|
Welcome to the group!!!
|
Welcome Peter
|
Welcome! Servo motors, this would be another 1st.
|
hi welcome to the forum.
|
Starting to make progress
After a lot of set backs and having to build a workshop,finaly started to make progress , bought the cable today. finished interfaceing Mach3 with the servo packs.:)
|
That was fast! I meant building a workshop ...
|
bolted together
thanks ,lucky the machine is designed to bolt together so moving it was not a problem. But finding time to work on the machine is hard.but am nearly finished the z Axis, have to charge the gas lift for the correct counter balance then i can assemble
|
All times are GMT -6. The time now is 18:22. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.