Best price 4 /1 timing pulleys
 

Looking best price to make a 4 to 1 ratio timing pulley reduction
could really use exact part numbers and matching seller sites
really need to get my cost down going broke no overtime in this bad economic situation and i am now at the point of just buying parts i am not making

I have complete sets of 4:1 that I can ship. Also if you need them I have axles and bearings that will work in my motorplates or in other plates.

A complete set being 3 sets two sets for my x axis and one set of my y axis?
Also belts to match
my machine design is a variation of mechmate so motor plates are different still a gear rack design

What about your z axis? You need 4 really.

x1
x2
y
z
are the required axis motors

Smrish i have totally built screw drive for the z axis sorry i didn't explain this i have thirty yrs of machining exp. And i have really design my machine as a cross between a mechmate and another machine my next machine will be completly different given and easier way to make parts not on a manual mill

I didn't use a mill to build my MM; I don't have to :)

Mike, I need a set of timing pulleys, just 1 pair. need 1/4" bore for motor and 3/4" bore for driven. do you have and do you take paypal? thanx....pete