MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   Miscellaneous / General / Whatever / Catchall (http://www.mechmate.com/forums/forumdisplay.php?f=13)
-   -   Make cnc week (http://www.mechmate.com/forums/showthread.php?t=4437)

Fox Thu 20 March 2014 10:22

Make cnc week
 
Dunno if it will be good, but MAKE has cnc week going over at their blog. Also a contest if anybody wants to participate...

http://makezine.com/blog/

For instance this looks like fun ... a parametric CNC table: http://makezine.com/projects/make-38-cameras-and-av/cnc-maker-bench/

IMMark Thu 20 March 2014 11:13

Thanks for sharing. I love all the Maker stuff...the kind of people I would love to sit down with over a beer and share stories and ideas!!!
Mark

darren salyer Mon 26 May 2014 06:54

Here is a discussion on joints that can be made with a CNC.


http://makezine.com/projects/make-33...nel-joinery-2/

dbinokc Wed 28 May 2014 11:43

If you are interested in hanging out with makers, you should see if there is a Hackerspace in your area. There was one in OKC for a while, but it could not get enough financial support and members to keep its doors open. I was a founding donor, but did not have time to really participate. There is one in Tulsa that is doing quite well and manages to have annual mini maker faires.


All times are GMT -6. The time now is 03:03.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.