woodibe
Sun 13 March 2022, 07:31
it's finally starting after having gathered all the components
- steel profiles
- electronics
- mechanical
- laser cutting
I started to cut the profiles for the table-10
Right now I'm making the cuts for the construction of the 131.9" table.
I have to make some modifications because here in Senegal we do not find all the sections
but I looked in the forum of others had the same problem and we replace with something else
For example
cross bearers 10 10 302 in 1.5"x3" in 80x45mm (3.14"x1.77")
the feet will also be the same (3.14"x1.77")
as well as the round tube of 30x3 mm will be replaced by rectangular tube 80x40x3
I hope and I count on your various experiences to move forward and complete the construction of the beast.....
thank you
goodbye
ibrahim dakar senegal
- steel profiles
- electronics
- mechanical
- laser cutting
I started to cut the profiles for the table-10
Right now I'm making the cuts for the construction of the 131.9" table.
I have to make some modifications because here in Senegal we do not find all the sections
but I looked in the forum of others had the same problem and we replace with something else
For example
cross bearers 10 10 302 in 1.5"x3" in 80x45mm (3.14"x1.77")
the feet will also be the same (3.14"x1.77")
as well as the round tube of 30x3 mm will be replaced by rectangular tube 80x40x3
I hope and I count on your various experiences to move forward and complete the construction of the beast.....
thank you
goodbye
ibrahim dakar senegal