Work of Hani Al Mandeel in Bahrain

[Gerald_D]

These pics illustrate the type of "carvings" that can readily be done with a MechMate.....

http://www.mechmate.com/Forum/messages/2/3289.jpg
http://www.mechmate.com/Forum/messages/2/3290.jpg
http://www.mechmate.com/Forum/messages/2/3292.jpg
http://www.mechmate.com/Forum/messages/2/3293.jpg
http://www.mechmate.com/Forum/messages/2/3294.jpg
http://www.mechmate.com/Forum/messages/2/3295.jpg
http://www.mechmate.com/Forum/messages/2/3296.jpg
http://www.mechmate.com/Forum/messages/2/3297.jpg
http://www.mechmate.com/Forum/messages/2/3298.jpg

[Gerald_D]

http://www.mechmate.com/Forum/messages/2/3300.jpg
http://www.mechmate.com/Forum/messages/2/3301.jpg
http://www.mechmate.com/Forum/messages/2/3302.jpg
http://www.mechmate.com/Forum/messages/2/3303.jpg
http://www.mechmate.com/Forum/messages/2/3304.jpg
http://www.mechmate.com/Forum/messages/2/3305.jpg
http://www.mechmate.com/Forum/messages/2/3306.jpg
http://www.mechmate.com/Forum/messages/2/3307.jpg
http://www.mechmate.com/Forum/messages/2/3308.jpg
http://www.mechmate.com/Forum/messages/2/3310.jpg

[fabrica]

Gerald, Can you please send to me one of these cutting files (on a format which could be used on Artcam) so that I too could try them out in my machine.

[Gerald_D]

I don't have any of Hani's files, all I have are some photos and email correspondence. He also started with a ShopBot, found that he wanted to do bigger stuff, and then built his own CNC router. So I thought, if Hani can do it in Bahrain, I can do it in South Africa....

[Gerald_D]

This may be interesting for you:
www.abbott.demon.co.uk/knots.html (http://www.abbott.demon.co.uk/knots.html)
www.clanbadge.com/knots.htm (http://www.clanbadge.com/knots.htm)