PDA

View Full Version : Downloads archived 30 June 2008


Admin
Sun 20 May 2007, 01:26
Procedure:

You are required to accept the user agreement (http://www.mechmate.com/useragreement.html) and register (http://www.mechmate.com/forums/register.php) for a password before the files can be downloaded.

The most efficient way to view the files is to first save them to your PC. Right-click on the file name, "Save Target As...." Please use all data at own risk, especially for the inch users. Would appreciate feedback on any errors found (http://www.mechmate.com/forums/showthread.php?t=75) so that the data can be corrected for other users as well.

I know it is not environmentally friendly, but serious builders will print out all the PDF files onto loose sheets of paper for use in the workshop. The prints are intended for A4 paper - remember to autoformat if using other paper sizes.

There is a drawing index spreadsheet at www.mechmate.com/MechMate_Drawing_Index_Rev_2.1.xls (http://www.mechmate.com/MechMate_Drawing_Index_Rev_2.1.xls) - it contains notes (valid 10 April 2008) that you can pencil onto the printed sheets.