PDA

View Full Version : NIKO Track Roller Bearings

marchantdice
Sun 27 April 2008, 05:21
NIKO, Nippon Kodo (Japan) Automation Technology.

We are pleased to announce that Marchant Dice Ltd are now UK distributors for NIKO Track Roller Bearings.

NIKO Track Roller Bearings are a direct replacement for all the Major Brand Names.

NIKO Track Roller Bearing Catalogue: http://nipponkodobearings.com/English/catalogue/NIKO%20TRB%20Product%20Information.pdf
Gerald D
Sun 27 April 2008, 06:10
What's the price on the RM 3 2RS bearing that should work on the MechMate?
Gerald D
Sun 27 April 2008, 06:20
PS. I have a hard time believing their speeds columns for most of those bearings. There are 40mm ID bearings with speeds of 79 000 rpm! :rolleyes:
J.R. Hatcher
Sun 27 April 2008, 09:59
PS. I have a hard time believing their speeds columns for most of those bearings. There are 40mm ID bearings with speeds of 79 000 rpm! :rolleyes:

That's about 374 mph, that would be a nice jog speed for the MechMate. :eek:
Gerald D
Sun 27 April 2008, 10:26
The OD of those bearings are 110mm . . . . better check that the wind doesn't blow the paint off!
marchantdice
Mon 28 April 2008, 03:13
What's the price on the RM 3 2RS bearing that should work on the MechMate?


RM3ZZ £9.60gbp/pce - RM2ZZ £8.66gbp/pce we don't have 2RS in stock (3 months) excluding VAT and delivery
Robert M
Mon 28 April 2008, 06:11
That's about 374 mph, that would be a nice jog speed for the MechMate. :eek:

As an ex but still passionate race car driver, I can safely say I’m a speed freek, but with some reserve :rolleyes:!
When it come to woodworking, I rather use the patience & artsy slower past approach. Just for the fun of conversation here, wouldn’t you guys say that 374 mph or 85 307 904 000 ips ( or for those whom big numbers are fad ; 1 421 798 400 ipm) would be a tiny tab to fast & stressful for an average hobbyist or for that matter even a small pro-shop ?? :eek: