PDA

View Full Version : servo motors


eloid
Thu 07 February 2008, 05:35
Looking for a source for dc brush servo motors 800-1000 oz-in

Richards
Thu 07 February 2008, 08:46
Eloid,
Those would be some might large motors. I have an MCG ID33004. That motor weighs 10.5 lb, is 7.78 inches long, and has only about 220 oz*in torque. From what I've read, servo motors are usually used with gearboxes to get the required torque at the needed speed.

eloid
Thu 07 February 2008, 12:38
you got it. 3.6 or 7.2 I like servo cuase the quiter and torque is more linear vs rpm.

isladelobos
Mon 12 May 2008, 09:19
This is a good servo motor price and torque.

130SJT-M075D -- 1.6KW - 7.5Nm - 2500rpm - 6.0A

410$ aprox.

And this is a very good torque

130SJT-M150B --- 2.3KW - 15Nm - 1500rpm - 9.5A

500$ aprox.

perfects for configure a plasma beast.

http://gskcnc.com/catalog/images/servo_motor.jpg