caddzeus
Mon 06 May 2019, 21:11
In the motor tuning section of Mach3/4 what is the preferred setting for g-force given the weight of a typical mechmate build?
IamDave
Thu 30 May 2019, 07:03
Mine is set at .081503. The software determined that for me. I could not find a preferred setting, based on weight. I suspect that it would also depend on the motor setup, you have configured. I use a (slow) cutting straight drive setup.
vBulletin® v3.8.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.