PDA

View Full Version : position error for cable chains


ricdu34
Thu 30 August 2018, 04:41
as wrong, I did not weld the end of the gantry properly.
The one planned for the passage of the cables is on the wrong side (in front of the gantry)
as we can see on the first picture, I will have to reverse the parts that support the cable chain of the gantry.
I understand that I will have the engine behind.
Can I have other problems than the media to modify?

je me suis trompé ,je n' ai pas soudé l' embout du portique correctement.
Celui prévu pour le passage des cables est du mauvais coté(devant le portique)
comme on peux voir sur la premiére photo ,je vais devoir inverser les pieces qui supporte la chaine de cable du portique.
J' ai bien compris que je vais avoir du coup le moteur derriére.
est ce que je risque d' avoir d' autres probléme que les supports a modifier?

ifffff
Thu 30 August 2018, 06:20
I made same mistake when was building #38. Put that cable carrier to other side of gantry.