iclazion
Sat 23 September 2017, 22:53
This post will go into detail about the build from the ground up.
Feel free to follow the build. The completed cutting area will be 3000mmx2000mm
I have a couple of questions that I will post first as I bought the plans 22/09/2017:
I have a cutting list and I would like to know how many of each I will require, I am also getting it cut from 300 stainless steel "non magnetic - so please let me know if you think there will be issues with stainless steel 300"
Here is the profiles, please let me know if I have every thing I need as I will be running a milling motor on the mamba:
1 x 10 20 451
1 x 10 20 452
1 x 10 20 456
1 x 10 20 457
1 x 10 20 458
1 x 10 30 422
1 x 10 30 450
1 x 10 30 455
1 x 10 40 372
1 x 10 40 432
1 x 10 40 433
1 x 10 60 215
1 x 10 60 315
1 x M5 10 312
1 x M5 10 314
1 x M5 10 322
1 x M5 10 324
I want to know if http://www.smslinear.com/guidewheelstrack.php are still in operation as I need to order 14 x GW3SSX and 6 "off Eccentric Bushings" B3X
Hope Rick's email works rick@superiorbearing.com
Motors that will be running the show Nema34 x 4. 2 on my X-axis, 1 on the Y-axis and 1 on the Z-axis.
Will also include prices because "RDI Projects & Steel Works" Will do the cutting, bending drilling, tapping and welding.
Feel free to follow the build. The completed cutting area will be 3000mmx2000mm
I have a couple of questions that I will post first as I bought the plans 22/09/2017:
I have a cutting list and I would like to know how many of each I will require, I am also getting it cut from 300 stainless steel "non magnetic - so please let me know if you think there will be issues with stainless steel 300"
Here is the profiles, please let me know if I have every thing I need as I will be running a milling motor on the mamba:
1 x 10 20 451
1 x 10 20 452
1 x 10 20 456
1 x 10 20 457
1 x 10 20 458
1 x 10 30 422
1 x 10 30 450
1 x 10 30 455
1 x 10 40 372
1 x 10 40 432
1 x 10 40 433
1 x 10 60 215
1 x 10 60 315
1 x M5 10 312
1 x M5 10 314
1 x M5 10 322
1 x M5 10 324
I want to know if http://www.smslinear.com/guidewheelstrack.php are still in operation as I need to order 14 x GW3SSX and 6 "off Eccentric Bushings" B3X
Hope Rick's email works rick@superiorbearing.com
Motors that will be running the show Nema34 x 4. 2 on my X-axis, 1 on the Y-axis and 1 on the Z-axis.
Will also include prices because "RDI Projects & Steel Works" Will do the cutting, bending drilling, tapping and welding.