View Full Version : Steel cutting at high speed
silverdog
Tue 05 September 2017, 04:05
https://www.youtube.com/watch?v=i61cy7aAi8A&pbjreload=10
Since Mechmate is a stronger shopbot ... :-)
give a look at this CAM too :-)
https://github.com/fellesverkstedet/Bark-beetle-parametric-toolpaths
dbinokc
Thu 21 September 2017, 17:59
From the video and some other references, it looks like the use of Trochoidal milling is the real technique. I have will defintely have to do a little more research on that and maybe give it a try.
silverdog
Fri 22 September 2017, 05:12
I think it's an alchemy of the right elements and right mesure.
Trochoidal milling is the fundamental elemet, but you need the right chip load, the right ramp cutting .... I still need to study :-)
Dumitru Ivanov
Fri 22 September 2017, 06:37
From the video and some other references, it looks like the use of Trochoidal milling is the real technique. I have will defintely have to do a little more research on that and maybe give it a try.
Same here. I was unaware of it up to this point.
Macwood
Fri 22 September 2017, 13:10
I just found this
https://www.youtube.com/watch?v=S-DB2Vmr0qw
Has some interesting info on this type of milling.
silverdog
Sun 24 September 2017, 04:02
https://www.youtube.com/watch?time_continue=50&v=ORJ-Q3TFW5o
and this with ESTLCAM that has a very acreactive price and the trochoidal strategies
Chilson
Sat 10 March 2018, 02:02
This is so great. It looks like this way of cutting doesn't have many flaws, at least not compared to the old ways. Cheers for the video, Macwood.
vBulletin® v3.8.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.