View Full Version : Not quite the first cut, Suffolk UK
sphericos
Mon 21 December 2015, 03:18
My machine has been fully functional for a couple of days but due to stupidity on my part I was hunting for a fault that was just human error. I was running the spindle backwards. It did cut just not very well.
https://youtu.be/__fp9QJMRas
lonestaral
Mon 21 December 2015, 03:41
Well done.
All shiny and new.(It wont last):D
jhiggins7
Mon 21 December 2015, 05:24
A work of art! Just needs some logos
sphericos
Tue 22 December 2015, 04:12
I will probably get around to the logo after Christmas. I still have a few minor things to finish, I still need to glue down the spoilboard and surface it. My 12v estop circuit is working but I still need to finish the pause and resume buttons once I have figured out how to get them working in LinuxCNC.
pblackburn
Wed 23 December 2015, 14:26
Great job so far David
Robert M
Mon 28 December 2015, 08:13
Welcome aboard @_# !!
Andrew_standen
Fri 05 February 2016, 11:28
Congratulations David. Now you can make dust... lots of it
Cheers
Andrew
vBulletin® v3.8.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.