shelbygt500buddy
Sun 09 June 2013, 10:45
Hi,
I believe I made a big mistake. I wired the motors with 18/4 non sheilded cable. I believe i needed sheilded cable now that I look back. Should I finish with what i got and then try running the machine and see if it causing problems or should i rewire all the motors and pull the 16/4 sheilded continuous flex wire? I did the load calcs and 18 gauge for the longest length I have has close to 3% drop or a little more can't remember but was uncomfortable with it.
I believe I made a big mistake. I wired the motors with 18/4 non sheilded cable. I believe i needed sheilded cable now that I look back. Should I finish with what i got and then try running the machine and see if it causing problems or should i rewire all the motors and pull the 16/4 sheilded continuous flex wire? I did the load calcs and 18 gauge for the longest length I have has close to 3% drop or a little more can't remember but was uncomfortable with it.