danilom
Mon 22 April 2013, 09:31
After two years of use my bearings gave up after some MDF routing.
Spindle is very easy to disassemble, inside are two angular contact bearings in the nose 7005 and one 7002 on top. Very strangely arranged but ok...
After looking at spending 300$ on these three bearings I found a good source (SKF) and bought some spares for future use, he also had some cheaper brand but these were cheap enough. Idea of buying another spindle with chinese bearings was out of question as I will be upgrading to a more powerfull one in the future and don't want 2 of these :)
Will post pictures later after assembly, anyone interested in these bearings can contact me.
Spindle is very easy to disassemble, inside are two angular contact bearings in the nose 7005 and one 7002 on top. Very strangely arranged but ok...
After looking at spending 300$ on these three bearings I found a good source (SKF) and bought some spares for future use, he also had some cheaper brand but these were cheap enough. Idea of buying another spindle with chinese bearings was out of question as I will be upgrading to a more powerfull one in the future and don't want 2 of these :)
Will post pictures later after assembly, anyone interested in these bearings can contact me.