telah
Sun 22 January 2012, 14:45
Hi all,
I am almost done planing everything to start the build and I wanted a confirmation before I place order on the rack and pinion.
I will be using 4 KL34H260-35-4B controlled by a G540 with a 40v power supply and a 4:1 belt drive this will supply 1840oz-in torque.
the motor Step angle is 1.8 DEG/STEP I am trying to find the optimal configuration for the rack the spur gear and the belt drive
My understanding for the belt drive is the amount of teeth and pitch is irelevent as long as they have a 4:1 ratio so I should be fine with a 40 tooth and a 10 tooth is that a true assumption ?
for the rack and pinion even after ready different thread about the calculation
I'll be honest I am still puzzled of what to pick :(
Could someone help me on figuring what rack and gear to choose ?
and a very dummy question, the reseller I found is selling Rack and Spur Gear, English is not my native language but is a Spur gear the same as a pinion or I am looking at the wrong thing to buy ?
Luc
I am almost done planing everything to start the build and I wanted a confirmation before I place order on the rack and pinion.
I will be using 4 KL34H260-35-4B controlled by a G540 with a 40v power supply and a 4:1 belt drive this will supply 1840oz-in torque.
the motor Step angle is 1.8 DEG/STEP I am trying to find the optimal configuration for the rack the spur gear and the belt drive
My understanding for the belt drive is the amount of teeth and pitch is irelevent as long as they have a 4:1 ratio so I should be fine with a 40 tooth and a 10 tooth is that a true assumption ?
for the rack and pinion even after ready different thread about the calculation
I'll be honest I am still puzzled of what to pick :(
Could someone help me on figuring what rack and gear to choose ?
and a very dummy question, the reseller I found is selling Rack and Spur Gear, English is not my native language but is a Spur gear the same as a pinion or I am looking at the wrong thing to buy ?
Luc