Motore Stepper directly on the rack [Archive]

View Full Version : Motore Stepper directly on the rack

forumcnc

Sun 02 January 2011, 04:34

Hello

Can you tell meif it is you can mount a motor directly on the rack without any type of gearbox and stepper motor to take power

Thanks

MetalHead

Sun 02 January 2011, 05:29

You can direct drive the system without a gear box. NEMA 34 Motors are what the system uses.

http://www.solarbotics.net/library/pdflib/pdf/motorbas.pdf

Welcome to the team also !!!

forumcnc

Sun 02 January 2011, 08:54

thanks for the reply

But is there any online store where I buy them

forumcnc

Mon 03 January 2011, 06:44

sorry I'm Italian and I could not find anything and indicates some possible

MetalHead

Mon 03 January 2011, 06:49

(I removed my previous post since I posted it logged in as Admin)

If you look at the main forum you will see it broken down in sections.

http://www.mechmate.com/forums/forumdisplay.php?f=26

Is where I would start. It talks a lot about the different motors. Also look at the "MechMates Already Cutting" and you will see completed builds and can learn from those threads also.