lumberjack_jeff
Sun 26 September 2010, 12:30
Hi all. This was a fun little project. Nothing fancy, just a cabinet for a 1936 South Bend Model 9A Lathe.
Doors are 3/4" mdf, the rest of the cabinet is AC fir plywood. The photo could be improved, but the doors have "S" and "B" engraved. Done in SheetCam.
Doors are 3/4" mdf, the rest of the cabinet is AC fir plywood. The photo could be improved, but the doors have "S" and "B" engraved. Done in SheetCam.