Carlos Mariche
Fri 10 September 2010, 01:42
Hello people, after read some threads about MM proyects I decided start my own project, at this point I´m working in the mechanical design but in parallel I´m also working in the electronic.
I saw there is a lot of options about power supplies (PS) but at the end It seems all people prefer the easy way and better buys Anteck PS.
Well, I really don´t know specifically what is the best configuration in order to have the most standard power supply to all people, it is obvius that it has to do more than anything with the type of configuration that each has for your machine. In past I have constructed some PS as my univerisity proyects, no one like MM PS, but a PS to the end of the day.
Here is where I need your help because frankly did not encourage me to buy something that maybe I can do and less with the reference Gerald gives us about Antek guys. http://www.mechmate.com/forums/showthread.php?t=55&highlight=footprint :(
The configuration that I will consider for the PS will be one based on the following arrangment of parts for a MM:
4 G203V's driving the 4 motors (Gerald, please suggest the most standardized voltage, if there is )
PMDX-122 (7-12VDC or 6-9 VAC)
Proximity switches (12VDC)
I would like to finish with something close to it :D : http://www.mechmate.com/Forum/messages/17/3641.jpg
I´ll be working only weekends in this project because I have to run my business :cool: , please be patient, I will be posting information as soon as I generated it to build circuits, parts and development of manufacturing.
FOR NOW PLEASE LET ME KNOW ABOUT THE MOST IMPORTANT POINT TO CONSIDER FOR Ps CONFIGURATION, AND PLEASE, DON´T TRY TO BUILD THIS PS UNTIL WE HAVE FINISHED AND TESTED
Good machining :)
I saw there is a lot of options about power supplies (PS) but at the end It seems all people prefer the easy way and better buys Anteck PS.
Well, I really don´t know specifically what is the best configuration in order to have the most standard power supply to all people, it is obvius that it has to do more than anything with the type of configuration that each has for your machine. In past I have constructed some PS as my univerisity proyects, no one like MM PS, but a PS to the end of the day.
Here is where I need your help because frankly did not encourage me to buy something that maybe I can do and less with the reference Gerald gives us about Antek guys. http://www.mechmate.com/forums/showthread.php?t=55&highlight=footprint :(
The configuration that I will consider for the PS will be one based on the following arrangment of parts for a MM:
4 G203V's driving the 4 motors (Gerald, please suggest the most standardized voltage, if there is )
PMDX-122 (7-12VDC or 6-9 VAC)
Proximity switches (12VDC)
I would like to finish with something close to it :D : http://www.mechmate.com/Forum/messages/17/3641.jpg
I´ll be working only weekends in this project because I have to run my business :cool: , please be patient, I will be posting information as soon as I generated it to build circuits, parts and development of manufacturing.
FOR NOW PLEASE LET ME KNOW ABOUT THE MOST IMPORTANT POINT TO CONSIDER FOR Ps CONFIGURATION, AND PLEASE, DON´T TRY TO BUILD THIS PS UNTIL WE HAVE FINISHED AND TESTED
Good machining :)