Smallest project size for a full size MM?

[Rook3]

Just wondering what the smallest project size can be done with a "full" size Mechmate, one with an appx. 4x8' work area.

Can you do real small stuff, like custom etching dog tags for example as well as doing full size signs?

I have a list of potential projects in a wide variety of sizes. :)

Thanks,

Russ

[Alan_c]

The machine has got the resolution (especially if you add reduction drives), it just depends on how small your cutting tool is.

[Gerald D]

Browse the The Show Room (http://www.mechmate.com/forums/forumdisplay.php?f=86) and see some small stuff like this one:
http://www.mechmate.com/forums/showthread.php?t=2163 (the rule there is showing centimeters, not inches)

[Rook3]

I just ran across the build thread of Jayson in Australia showing some small projects he's done.
Great! really looking forward to starting my build now that I know it can pretty much do everything I require. :)

Thanks everyone!

[Kobus_Joubert]

Small things from my side on 2400 x 1200 mm table...

http://www.mechmate.com/forums/showthread.php?p=14442&postcount=212

[Jayson]

Yep, small should be no problem depending on what it is you are doing. My belt reductions are only 3.2:1 so if you use 7.2:1 and forgo some speed you could get it even finer than I have. Having said that, I have not seen the need for more accuracy.

Good luck.

Jayson