View Full Version : Newbee from - Petersburge VA USA
danmcgee
Wed 10 March 2010, 14:13
Hey all I am thinking of making a smaler version of the MechMate to make aircraft parts with. Is there anyone in Virgina that has built the MechMate that I could come see or NC that is close to me.
I am located in Petersburg VA at Ft. Lee.
I would really like to see one up close running and ask some ??? befor I spend money.
Dan
MetalHead
Wed 10 March 2010, 15:02
Welcome to the group.
You looking at a 4x4 size machine?
Mike
domino11
Wed 10 March 2010, 17:59
Welcome Dan.
danmcgee
Thu 11 March 2010, 06:54
No I need one just a bit bigger I would like to build one 4 x 8.
SumBum
Thu 11 March 2010, 07:00
I'm not sure how far you are from JR (http://www.mechmate.com/forums/showthread.php?p=3039&postcount=1) but he's in NC
oopz
Thu 11 March 2010, 07:41
No I need one just a bit bigger I would like to build one 4 x 8.
Mine -the 01 of 02- is just 8.13´(2450m) X 4.15´ (1250mm) CUTTING AREA but it is a lot more in footprint :D
So we who building SMALL machines need to... HAHAHHAHAHHAH..
GOOD LUCK with your build AND dont let the comunity force U to build a BIG MM :p;)
Take care
/oopz
jehayes
Thu 11 March 2010, 09:26
No I need one just a bit bigger I would like to build one 4 x 8.
Dan: While there is no "standard" size - 4x8 is very common, it is what I built (I assume you mean 4x8 cutting area so it can handle US standard sheet goods.)
Joe
vBulletin® v3.8.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.