PDA

View Full Version : Plan Question

Tim655
Thu 21 January 2010, 08:54
Are plans available in DWG. format?
Alan_c
Thu 21 January 2010, 09:15
No, PDF and DXF for the laser files only
Tim655
Thu 21 January 2010, 09:31
How do i get the DXF format?
Gerald D
Thu 21 January 2010, 10:00
The page from which you downloaded the drawings said:

A lot of people miss downloading the ProfilesBends30Jun08.zip (http://www.mechmate.com/forums/attachment.php?attachmentid=1676&d=1214853734) file at the bottom of this page - when that is unzipped, it has all the .dxf files for the laser or water jet cut components.

Also have a look at these threads:
CNC Laser Cut Drawings - are the .dxf files of these MM parts available? (http://www.mechmate.com/forums/showthread.php?t=1496)
3D CAD models of MechMate - SketchUp, SolidWorks, etc. (http://www.mechmate.com/forums/showthread.php?t=183)
Tim655
Thu 21 January 2010, 10:01
Thanks again, you have been alot of help.
Zouave
Tue 09 March 2010, 15:42
Okay, maybe I'm just as blind as everyone else, but I can't seem to find the dxf files for the laser cutting that everyone keeps referencing. Were they taken down for some reason that I'm not aware of? Thanks...
riesvantwisk
Tue 09 March 2010, 17:15
Eric,

I think you are looking right here (http://www.mechmate.com/forums/showthread.php?t=376) should the download be, but I don't see the DXF myself.

Send a message to Mike, may be he forgot to put the link back after he updated the DXF files.

Ries
MetalHead
Tue 09 March 2010, 20:45
Contact me if you are in need of laser cut parts.

If you are in the US you can get parts here.

http://www.cvsupply.com/servlet/the-MechMate/Categories

If you are not in the US, send me a PM and let me know where you are and we will get you what you need to get the parts made.

None of the drawings are available in DWG format only in PDF.

Mike
riesvantwisk
Tue 09 March 2010, 20:52
Mike,

you might want to make that clear on the mentioned page. I think it's written quite a bit on this forum where to get the files from and it might confuse people of the DXF's are not there any longer.

Ries
MetalHead
Tue 09 March 2010, 20:56
I'll add some notes to the downloads page.
Johannescnc
Fri 12 March 2010, 06:01
Nice site Mike! hope it does well for you.
glintid
Sat 13 March 2010, 16:22
Are the DXF drawings not available on the site for download anymore? The way I read this is one has to buy the parts ready cut from Metalhead? Correct me if I'm wrong.
MetalHead
Sat 13 March 2010, 16:46
David sent you a PM
glintid
Sat 13 March 2010, 16:51
David sent you a PM

Hi Mike, no PM in my inbox yet. Does it take a bit of time to arrive?
MetalHead
Sat 13 March 2010, 17:02
Took me a few seconds to type :D .
glintid
Sat 13 March 2010, 17:05
I haven't done too much PMing...:o and it shows. Thanks
szkutnik
Wed 24 March 2010, 02:02
If somebody have dxf files please send them to me.
I would like cat one set of parts.
KenC
Wed 24 March 2010, 02:15
You want to order some desert while you are at it? :)
Robert M
Wed 24 March 2010, 05:28
Kent…. If I may
I’d like a take out on a « Sago Pudding” or “Dodol Durian” or my favorite, dbl chocolate mousse :D
MetalHead
Wed 24 March 2010, 07:11
szkutnik - sent you a PM
KenC
Thu 25 March 2010, 07:18
Kent…. If I may
I’d like a take out on a « Sago Pudding” or “Dodol Durian” or my favorite, dbl chocolate mousse :D

Rebert, you've been around :)