javeria
Wed 11 February 2009, 02:27
HI Folks - the rollers which me and vishnu ordered - turned out to have an angle of 70 degrees.
Now vishnu thinks that plunging a 90 degree v tool would solve the problem
what I think is that the 70 degrees has created more depth(of the groove in the wheel ) and now having the 90 degree tool plunge in will just get it to the same changed depth - I have a hunch that it would work - just wanted to get your views
RGDS
IRfan
Now vishnu thinks that plunging a 90 degree v tool would solve the problem
what I think is that the 70 degrees has created more depth(of the groove in the wheel ) and now having the 90 degree tool plunge in will just get it to the same changed depth - I have a hunch that it would work - just wanted to get your views
RGDS
IRfan