- Make your own V-Rollers if too expensive in your country
- M110110M Angle iron rails for X and Y axes
- Setting the rails straight
- Ideas & Experiments with different rail styles
- Source for Complete V-Roller bearing sets (with eccentrics) @ $good-price$
- Summary of rail & roller situation
- Capped rails using standard "BWC" V-track
- Personal angle iron cutting, grinding, tools, solutions - a collection of experiences
- Cutting the angle iron down with grinder and abrasive disk
- New rail height?
- Round shafts & ball slide blocks versus V-rails & V-wheels
- JR's rail grinding skate in a Lasered & Bent format for 4.5" grinders
- Other wheel size options for different ready-made sized v-rollers and rails?
- V-Rail profiling device - an alternative skate design
- Stymied on rail grinding - until the Pferd disks were found
- A record of burnt out grinders . . . .
- Aussie Dual Vee & Rack Supplier
- Some alternatives to Bosch grinders for skate
- question on y-rail stops
- Cutting the angle iron down with CerMet tipped circular saws
- Rails are bended...What alternatives I have...??? :(
- Pre-finished steel rails from Standard Steel Specialty
- Rack & Rail all in one . . . .
- Guards for the V-rollers and oilers for the rails?
- Bill of Materials? X-Rail Specification?
- Bearing question for the hold down roller (idler) under the rail
- Why does the angle iron have to be cut shorter for the rails?
- What to shim with?
- Holding the angle rails while cutting or grinding - jigs for sawhorses/trestles
- Stop blocks for alu rails
- Butcher saw V-wheels on e-Bay - can they be used?
- Why the angle iron must be 2" tall (or less) before cutting down with grinder
- Used skate
- rail grinding - does the wheel need adjustment as it wears?
- Could I harden the rails by myself ???
- Messed up while cutting-grinding a rail
- Rollers grooved to 70 degrees by mistake - can they be re-cut to 90 degrees?
- V-Wheels machined from plastics
- Track Roller Bearings for Denmark
- Idea to cut down rails on tablesaw
- Has anyone thought about chroming the rails? (hardness & corrosion)
- Spring washers instead of V-roller shims
- What are the size of the 8 bearings on the skate?
- Grinders in Gauteng - South Africa
- Need opinion on round bar rails with roller
- One grind rails question. (another alternative rail proposal)
- Breaking rollers on other machines
- V Groove Rollers
- Rail grinding process question
- Tips for Rail Grinding
- Experience on working with V-cap rails
- BOM (Build Of Materials) Grind Head Assembly M6 10 100 AA (Rail Grinding Skate)
- DIY-rails Which type of angle iron must be purchased?
- Shopbot rails delaminate?
- hiwin linear rails on ebay
- Steel L profile
- Question Regarding The Methods Used for Shimming Rails
- Question on Vee Bearings and bushes
- Aluminium Wheels?
- Static and dynamic loads on the axes
- Thought on milling rails . . .
- Diy Wheels Build your own
- pinion gearing and difference in sizes
- Rail Alignment
- hobbed or ground rack?
- selecting the right rack and pinion
- Why single V guide on machines ?
- Rail Grinding Jig for a Radial Arm Saw
- Bearing shielded or sealed
- problem assembly rails roller
- Ensuring Rails are Coplanar
- Superior Bearing Company
- 4 1/2" Grinders
- Aluminum Extrusion V-Rail for MechMate - RailMate
- Rail wear after 1 year
- Bosch GWS 7-125 Professional Grinder Skate Modification
- biscuit/plate joiner
- Skate rail grinding question
- rail grinding.
- X Rails Centres Distance
- Using used linear rails