- Flat Plate fabricated slide
- Z-slide Limit Stops
- Weight balancing springs - Gaslifts and coiled wire
- 350mm [14"] Extended Z-Slide - what does it mean?
- Z axis gear reduction
- What are the 4 M10x25 Bolts in 10 40 000 A for?
- Methods of grinding Z slide
- Check "Spider Plate" 10 40 432 for flatness
- Mounting hole for proximity switch - mod to spider?
- Taming a spider - how to get a flat base for the 6 rollers
- Tip: Mark the eccentric bushings . . . .
- An approach to extending Z-Axis.
- Multiple gas springs for extended stroke
- Beefing up a thin spider
- Z-Slide - width allowance for V-Cap rails on edges of slide plate
- Gas Spring for 350mm
- Best Pre-Made Z Slide for a ShopBot retro-fit?
- Gas Spring : Compatible automotive gas spring
- Modifying a gas spring to make it pump-able
- Heavy spindle
- Long Z axis and motor springs
- how do I mount a router base to the z plate?
- Support Bushings M120220T
- Spider Plate Oh-Oh!! (which # mark to drill on?)
- Extended Z input please-a mock up of altered spider
- How do the eccentric bushings for the v-rollers work?
- simple, albeit stupid question.
- Customized Gas Spring
- Taller support bases for the V-Rollers?
- Spider Plate Too Wide?
- Setting the Z-slide square (perpendicular) to the table top
- Gas Spring Failure - was upside down
- Z-Plate hole layout and metric to inch conversion variance
- Spiderplate error (booboo when drilling)
- Spider plate - 194mm wide and 4mm thick
- Grinding Slide Plate
- Is someone orderin a gas spring for the 10" slide soon?
- Is there someone selling the zslide & tube kits?
- Has anybody used a leadscrew to drive the Z axis?
- Drilling / Welding the Spider - Order of Operations?
- 9mm plate?
- purpose of z axis gas spring
- Gas Spring Stroke Length
- Z speed - spring lag?
- New Z-Slide or Prefab Rail Ideas!
- source for gas spring in Canada
- Z slide cutting errors