Author |
Message |
Gerald_D
Registered Username: Gerald_d
Post Number: 773 Registered: 11-2005
| Posted on Thursday, January 25, 2007 - 07:39 pm: |
|
These pics illustrate the type of "carvings" that can readily be done with a MechMate.....
|
Gerald_D
Registered Username: Gerald_d
Post Number: 774 Registered: 11-2005
| Posted on Thursday, January 25, 2007 - 07:43 pm: |
|
|
fabrica
Registered Username: Daya
Post Number: 244 Registered: 10-2006
| Posted on Thursday, January 25, 2007 - 08:11 pm: |
|
Gerald, Can you please send to me one of these cutting files (on a format which could be used on Artcam) so that I too could try them out in my machine. |
Gerald_D
Registered Username: Gerald_d
Post Number: 776 Registered: 11-2005
| Posted on Thursday, January 25, 2007 - 08:20 pm: |
|
I don't have any of Hani's files, all I have are some photos and email correspondence. He also started with a ShopBot, found that he wanted to do bigger stuff, and then built his own CNC router. So I thought, if Hani can do it in Bahrain, I can do it in South Africa.... |
Gerald_D
Registered Username: Gerald_d
Post Number: 777 Registered: 11-2005
| Posted on Thursday, January 25, 2007 - 08:30 pm: |
|
This may be interesting for you: www.abbott.demon.co.uk/knots.html www.clanbadge.com/knots.htm |